Technologies

Since 1995 Powersoft has been developing breakthrough technologies that have changed the landscape of professional audio. A pioneer in switched-mode technology, Powersoft has made Class-D reliable and effective, as a matter of fact improving its performances to a level unheard of before and making it widely accepted as industry standard. Alongside its switched-mode technology Powersoft has introduced other patented technologies that increased the efficiency of its amplifiers.

Class D

Although Class-D technology had been a well-established concept in electronics, Powersoft was a pioneer in implementing pulse width modulation technology in power amplifiers for professional audio.

PFC

Powersoft has always been very focused in energy saving and since the birth of the company the use of the Power Factor Correction (PFC) has been a trademark for improving performance,

SRM

In any amplifier output stage, the efficiency is a function of the difference in the output voltage delivered to the load and the rails voltage delivered from the power supply.

Recycling Energy

This technology not only increases the efficiency of the amplifier, it also protect the loudspeaker from overheating by removing the reactive energy.

Active Damping Control

With Active Damping Control, the effects of the added resistance by the length of the loudspeaker cable, are automatically balanced.

Powersharing

Powersharing enables part of the power to be shared across all output channels so that it can be used where it is needed the most.

DSP Technology

Signal processing in the digital domain is the operation that allows one to modify the audio response of a complex system. Powersoft, is always attentive to the sonic quality.

Audio-Networking

Our current line of amplifier offers Dante™ either as standard or as an option on any model, for audio over IP networking.

Remote Control

Controlling and monitoring of a Powersoft amplifier can be done through ArmoníaPlus. With various levels of control are granted by the different models.

Monitoring and Diagnostics

The new ArmoníaPlus' Health+ function offers advanced status monitoring of the entire audio system.

Moving Magnet

Moving Magnet drivers are composed of a series of multiple permanent magnets that are mechanically held together and sandwiched between two coils.

DPC

DPC® – Differential Pressure Control is the core technology of IPAL, Integrated Powered Adaptive Loudspeaker, an innovative Powersoft patented technology that will open a new era.

PoE

Power over Ethernet (PoE) is a method to transmit both power and Ethernet data over the same physical cable, eliminating the need for a separate power source.

Easy Swap

Easy Swap is designed to enable technicians to quickly and easily replace a faulty amplifier, without requiring specific knowledge or skills.