Quattrocanali è stato concepito per essere utilizzato con carichi a bassa impedenza (da 2 Ω) e con sistemi distribuiti da 70/100V: è inoltre possibile mischiare i diversi tipi di carico in ogni combinazione. Le versioni DSP+ di Quattrocanali garantiscono funzioni di controllo e monitoraggio remoto tramite ArmoníaPlus, Quattrocanali è concepito per adattarsi alle necessità di tutte le piccole e medie installazioni. Le versioni DSP+ estendono le capacità di routing dei segnali con l'integrazione dell'architettura di rete audio digitale AES67. Questa piattaforma di amplificazione può essere implementata in applicazioni critiche, come sistemi di allarma, grazie all'alimentatore che garantisce l'operabilità anche se connesso ad una UPS. I servizi MyPowersoft sono disponibili per questo prodotto Alimentazione Leggendario alimentatore di Powersoft universale con tecnologia switch mode fino a 400 VAC con Power Factor Correction Bassa corrente di spunto che riduce l'assorbimento all'accensione, eliminando la necessità di costosi sequencers di potenza Cavo di alimentazione staccabile con presa IEC C19/22. 2 (16A for EU, 20 A per USA) Protezioni Protezioni complete integrate nel desig
Progettato per non fermarsi
Powersoft’s DSP implements a complete audio management system that provides a unique level of control and can be used to set the tone of any space.
Our current line of amplifier offers Dante™ either as standard or as an option on any model, for audio over IP networking.
In any amplifier output stage, the efficiency is a function of the difference in the output voltage delivered to the load and the rails voltage delivered from the power supply.
Controlling and monitoring of a Powersoft amplifier can be done through ArmoníaPlus.
Power Sharing enables part of the power to be shared across all output channels so that it can be used where it is needed the most.
With modern systems growing larger in size, the resistance that is added by lengthy cable runs starts to become an issue.
Serie Quattrocanali - all models
| Model | Total power | Per channel | Channels | Form factor | AoIP |
|---|---|---|---|---|---|
| QUATTROCANALI 4804 DSP+ | 4800 W | 1500 W @ 2 Ω 1200 W @ 4 Ω 1200 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 2404 DSP+D | 2400 W | 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 2404 DSP+ | 2400 W | 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 1204 DSP+ | 1200 W | 400 W @ 2 Ω 300 W @ 4 Ω 300 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 4804 DSP+D | 4800 W | 1500 W @ 2 Ω 1200 W @ 4 Ω 1200 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 4804 DSP | 4800 W | 1500 W @ 2 Ω 1200 W @ 4 Ω 1200 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 4804 | 4800 W | 1500 W @ 2 Ω 1200 W @ 4 Ω 1200 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 2404 DSP | 2400 W | 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 2404 | 2400 W | 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 1204 DSP | 1200 W | 400 W @ 2 Ω 300 W @ 4 Ω 300 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 1204 DSP+D | 1200 W | 400 W @ 2 Ω 300 W @ 4 Ω 300 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 1204 | 1200 W | 400 W @ 2 Ω 300 W @ 4 Ω 300 W @ 8 Ω | 4 | - | - |
Funzionalità
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User selectable gain/sensitivity
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Lockable set-up by user selectable access key code
- Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
- TI C6000 DSP platform
- AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
- Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
- Delay up to 100 ms for time alignment
- Active DampingControl™ for cable compensation
- Peak, RMS voltage, RMS current, TruePower™ limiters
- Control and diagnostics monitoring via ArmoníaPlus
- Dedicated WebApp
- Attenuation (from 0dB to 26dB)
- High-pass filters (35Hz, 70Hz)
- Lo-Z/Hi-Z/70V/100V output selection
- Adjustable gain (from 26dB to 35 dB)
Specifiche
| Output power per Channel | |||
|---|---|---|---|
| Output power per Channel | 400 W @ 2 Ω | 300 W @ 4 Ω | 300 W @ 8 Ω |
| Bridge mode | 800 W @ 4 Ω | 600 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped voltage @8 | 70 Vpeak | ||
| Current | 33 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V - 264 V | ||
| Power consumption/current draw | |||
| Idle | 115 V: 31.1 W - 0.45 A | 230 V: 31.5 W - 0.25 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 227 W - 2.1 A | 230 V: 251 W - 1.4 A | |
| THERMAL | |||
| Operating temperature range | 0° - 45° C - 32° - 113° F | ||
| Thermal dissipation* | |||
| Idle | 115 V: 106 BTU/h | 230 V: 107 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 261 BTU/h | 230 V: 344 BTU/h | |
