PanoramicaModelliFunzionalitàSpecificheDownloadsCasi studio correlati
Panoramica
The Quattrocanali is a 4-channel, Class D power amplification platform designed for small- to medium-scale installations where system flexibility is a must. Offering the same reliability and renowned audio quality as all Powersoft amplifier platforms, the Quattrocanali Series operates with both Lo-Z and 70V/100V distributed lines or any mix of the two. The Quattrocanali Series also features patented SRM (Smart Rail Management) technology, which recycles the reactive energy coming back from the loudspeakers, helping lower overall power consumption, reducing heat dissipation, and keeping operating costs to a minimum. Quattrocanali DSP+D versions enable extensive amplifier control, as well as system and load monitoring via PC and ArmoníaPlus.
| Model | Available Versions | Total Power |
|---|---|---|
| Quattrocanali 1204 | DSP / DSP+ / DSP+D | 1200 W |
| Quattrocanali 2404 | DSP / DSP+ / DSP+D | 2400 W |
| Quattrocanali 4804 | DSP / DSP+ / DSP+D | 4800 W |
| Quattrocanali 8804 | DSP / DSP+ / DSP+D | 9600 W |
DSP: with integrated DSP DSP+: with DSP and AES67 support DSP+D: with DSP and Dante support For more information and details on Power Sharing capabilities, please refer to the data sheets.
Funzionalità
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User selectable gain/sensitivity
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Lockable set-up by user selectable access key code
- Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
- TI C6000 DSP platform
- AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
- Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
- Delay up to 100 ms for time alignment
- Active DampingControl™ for cable compensation
- Peak, RMS voltage, RMS current, TruePower™ limiters
- Control and diagnostics monitoring via ArmoníaPlus
- Dedicated WebApp
- Attenuation (from 0dB to 26dB)
- High-pass filters (35Hz, 70Hz)
- Lo-Z/Hi-Z/70V/100V output selection
- Adjustable gain (from 26dB to 35 dB)
Specifiche
| Potenza di uscita per canale | 1500 W @ 2 Ω | 1200 W @ 4 Ω | 1200 W @ 8 Ω |
|---|---|---|---|
| Modalità bridge | 3000 W @ 4 Ω | 2400 W @ 8 Ω | |
| Tensione massima senza clipping @8 Ω | 139 Vpeak | ||
| Corrente | 45 Apeak | ||
| Alimentazione | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Requisiti nominali di alimentazione | 100-240 V ±10%, 50-60 Hz | ||
| Tensione di funzionamento | 90 V - 264 V | ||
| Idle | 115 V: 31.3 W - 0.47 A | 230 V: 31.6 W - 0.27 A | |
| 1/8 della potenza massima di uscita @ 4 Ω | 115 V: 823 W - 7.7 A | 230 V: 840 W - 4.3 A | |
| Intervallo di temperatura di funzionamento | 0° - 45° C - 32° - 113° F | ||
| Idle | 115 V: 107 BTU/h | 230 V: 108 BTU/h | |
| 1/8 della potenza massima di uscita @ 4 Ω | 115 V: 760 BTU/h | 230 V: 818 BTU/h | |
Downloads
Documenti e file
Certifications12
CE Verification of Conformity AT-EMC-838-0522ACE Verification of Conformity AT-LVD-838-0222AFCC Supplier’s Declaration of Conformity SDoC Powersoft - Quattrocanali SeriesREACH Declaration of ConformityRoHsChina Declaration of ConformityRoHsCE Declaration of Conformity PowersoftEPA Declaration of Conformity PowersoftUK Declaration of Conformity DoC Powersoft - Quattrocanali SeriesCSA Certificate 80023853Declaration of Conformity DoC Powersoft - Quattrocanali SeriesCCC Certificate 2017010802984035CB Certificate NL-102706
Data sheets4
Technical notes12
Application Note - AES67 configuration on DSP+ and A+ modelsApplication Note - Limiters: basic concept and operationsApplication Note - VCA Operation and remote Off GPIApplication Note - Integrating Powersoft amplifiers in a Dolby Atmos systemApplication Note - Powersoft Amplifiers and AoIP (Dante-AES67)Application Note - HealthPlusApplication Note - Amplifiers Backup strategy and Startup timesApplication Note - Line Integrity Monitoring and Pilot TonesApplication Note - Web App for Powersoft AmplifiersApplication Note - Power SharingApplication Note - Interactive Tuning Plugin | Armonía PluginApplication Note - Damping Control
Casi studio correlatiCatalogo completo→
