T904

8000W/4-channel High-performance Amplifier with DSP and Dante™

Powersoft 4ch
SRM
PFC
Audio Network
Routing Channel
DSP On Board
ArmoniaPlus
GreenPower
MyPowersoft

Overview

The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.

The T904 is designed to power bi-amped systems like stage monitors,2-way point source speakers, and 2-way line sources, as well as smaller subwoofers.

The amplifiers feature input via Dante, AES3, and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end, and the amplifiers in-between.

MyPowersoft services are available for this product

  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía.
  • Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus
General
Output power per channel
Output power per channel1800W @ 2 Ω2000 W @ 4 Ω1600 W @ 8 Ω
Bridge mode3600 W @ 4 Ω4000 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω175 Vpeak
Current55 Apeak
AC main power
Power supplyUniversal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement100-240 V ±10%, 50-60 Hz
Operating voltage90 V – 264 V
Power consumption / Current draw
1/8 of max output power @ 4 Ω120 V: 1702 W – 15 A230 V: 1676 W – 8.2 A
THERMAL
Thermal dissipation
1/8 of max output power @ 4 Ω120 V: 1713 BTU/h230 V: 1624 BTU/h