T602

6000W/2-channel High-performance Amplifier with DSP and Dante™

Powersoft 2ch
SRM
PFC
Audio Network
Routing Channel
DSP On Board
ArmoniaPlus
GreenPower
MyPowersoft

Overview

The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.

MyPowersoft services are available for this product

  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía.
  • Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus
General
Output power per channel
Output power per channel3000W @ 2 Ω2500 W @ 4 Ω1300 W @ 8 Ω
Bridge mode6000 W @ 4 Ω5000 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω145 Vpeak
Current100 Apeak
AC main power
Power supplyUniversal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement100-240 V ±10%, 50-60 Hz
Operating voltage90 V – 264 V
Power consumption/ Current draw
1/8 of max output power @ 4 Ω120 V: 824 W – 7.6 A230 V: 839 W -4.3 A
THERMAL
Thermal dissipation
1/8 of max output power @ 4 Ω120 V: 678 BTU/h -170.9 kcal/h230 V: 731 BTU/h -184.2 kcal/h

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close