K10 DSP

2-Channel High Performance Power Amplifier

Powersoft_ICONS_features-black_2ch Powersoft_ICONS_features-black_PFC Powersoft_ICONS_features-black_Armoniaplus Powersoft_ICONS_features-black_DSP-onboard

Overview

The K10 is nothing short of power with 12,000 W from a single rack space chassis. Capable of driving subwoofers and large-scale FOH systems equally well, numerous touring sound reinforcement systems are built around racks exclusively utilizing K10′s for all frequency bands, benefitting greatly from maximum flexibility. Operation with 2Ω loads is not only safely possible but recommended, reducing the number of amplifiers required in a system.

In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size.

Fully digitally controlled and with a serial PC communication port as standard, the K10 is also available with KDSP board and KAESOP Ethernet/AES3 interface: the K10 DSP+AESOP amounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft's ArmoníaPlus (Interface available for MediaMatrix, Crestron, AMX, Q-SYS control, and monitoring systems).

Features

Power supply

  • Advanced switch-mode worldwide operating power supply technology for high performance and compact size
  • Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
  • Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers

Protections

Fully protected circuit design with:
  • Ac protection: shut down power supply when AC mains voltage is outside the operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
  • Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
  • Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals reducing maximum output
  • Thermal protection: output stages operating temperature up to 80 °C (176 °F)
  • Temperature controlled continuous variable speed fan, front to back airflow
  • Temperature forecast with LCD traced historical behavior

General

  • Fixed frequency switchmode output stage for high-grade sound accuracy
  • Compact size - all models only 1 RU for reduced rack cost and space
  • Lightweight - for easier racking and shipping: 12 kg (26.5 lbs) according to the configuration
  • Combo XLR/6.3mm jack Neutrik input connectors with link capability
  • AES3 digital input

Settings

  • LCD matrix interactive display
  • Comprehensive-user friendly front panel display menu
  • Built-in defeatable clip limiters for each channel
  • Digital gain-attenuator control
  • Defeatable gate selection for each channel
  • User-selectable gain/sensitivity
  • User-selectable maximum output power for each channel
  • User-selectable maximum mains current draw
  • Lockable set-up by user selectable access key code
  • Built-in remote control via the RS-485 interface provides full diagnostic, operational setting, and system monitoring

Monitoring

  • Hardware monitor available for fast local diagnostic
  • Load impedance measurement/display for each channel
  • Output power measurements/display for each channel
  • Mains voltage and current measurements/display
  • Downloadable log file of functional fault events with time-related trace
  • Smart Card settings, parameters and upgrades functionality

Digital Signal Processing

  • Analog Devices SHARC® DSP architecture
  • AD/DA converter: dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channel
  • Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
  • Delay up to 1 s for time alignment
  • Active DampingControl™ for cable compensation
  • Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter

Remote management

  • Control and monitoring through ArmoníaPlus
  • Interface available for MediaMatrix, Crestron, AMXcontrol, Q-SYS and monitoring systems
 

Specifications

General
Output power per channel
Output power per channel6000 W @ 2 Ω4000 W @ 4 Ω2000 W @ 8 Ω
Bridge mode12000 W @ 4 Ω8000 W @ 8 Ω
Max output voltage / current
Single channel mode200 Vpeak / 125 Apeak
Bridge mode400 Vpeak
AC main power
Power supplyUniversal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement100-240 V ±10%, 50-60 Hz
Operating voltage90 V – 264 V
Power consumption / current draw
Idle115 V: 91 W – 1.3 A230 V: 88 W – 1.17 A
1/8 of max output power @ 4 Ω115 V: 1250 W – 12.2 A230 V: 1250 W – 6.1 A
1/4 of max output power @ 4 Ω115 V: 2500 W – 22.6 A230 V: 2500 W – 11.3 A
THERMAL
Operating temperature range0° – 45° C – 32° – 113° F
Thermal dissipation*
Idle115 V: 546 BTU/h – 13.7 kcal/h230 V: 546 BTU/h – 13.7 kcal/h
1/8 of max output power @ 4 Ω115 V: 1244 BTU/h – 313.5 kcal/h230 V: 1244 BTU/h – 313.5 kcal/h
1/4 of max output power @ 4 Ω115 V: 1943 BTU/h – 489.6 kcal/h230 V: 1943 BTU/h – 489.6 kcal/h

Contact us

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud.

Sign up