2 (16A for EU, 20 A per USA) Protezioni Protezioni complete integrate nel design dei circuiti: Protezione AC: spegnimento dell'alimentazione quando la tensione di rete è fuori scala Clip limiter: impedisce che segnali con valore di picco troppo elevato raggiungano gli altoparlanti, pur mantenendo piena potenza di picco VHF protezioni: protegge gli altoparlanti da segnali ad alta frequenza non udibili e non musicali Protezione da corto circuito: protegge l'amplificatore dal corto circuito o da altri eventi stressanti per gli stadi d'uscita Limiter a lungo termine: protegge l'altoparlante da segnali stazionari a lungo termine (senza audio) riducendo il segnale in uscita Protezione termica: temperatura di funzionamento degli stadi d'uscita fino a 80°C (176°F) Temperatura controllata con ventola a velocità variabile, flusso d'aria fronte/retro Generale Stadio di uscita switch-mode a frequenza fissa per un alto grado di precisione sonora Compatto in una singola unità rack per spazi e costi ridotti Peso leggero - circa 7 kg Connettori standard Phoenix: ingressi analogici e digitali, uscite audio, aux, allarmi e GPI/O Ingresso per canale selezionabile da remoto Con
| Model | Available Versions | Total Power |
|---|---|---|
| Duecanali 804 | DSP / DSP+ / DSP+D | 800 W |
| Duecanali 1604 | DSP / DSP+ / DSP+D | 1600 W |
| Duecanali 4804 | DSP / DSP+ / DSP+D | 4800 W |
| Duecanali 6404 | DSP / DSP+ / DSP+D | 6400 W |
DSP: with integrated DSP DSP+: with DSP and AES67 support DSP+D: with DSP and Dante support For more information and details on Power Sharing capabilities, please refer to the data sheets.
Funzionalità
- Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside the operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
- Fixed frequency switchmode output stage for high-grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Lightweight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
- Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
- Switchable 35Hz / 70Hz high pass filter per channel
- Mixed configuration with Lo-Z/Hi-Z systems possible
- Bridged mode low impedance per channel pair
- NC/NO contacts per channel for alarm notifications
- Remote ON/OFF switch
- Remote VCA control per channel
- Attenuation (from 0 dB to 26 dB)
- Max output voltage
- Output and gain reduction metering
- Diagnostics (temperature, fans,...)
- Attenuation (from 0 dB to 26 dB)
- High Pass Filter (35 Hz, 70 Hz)
- LoZ/HiZ/70V/100V output selection
- Gain (from 26 dB to 35 dB)
Specifiche
| Output power per Channel | |||
|---|---|---|---|
| Output power per Channel | 3000 W @ 2 Ω | 2400 W @ 4 Ω | 1250 W @ 8 Ω |
| Bridge mode | 6000 W @ 4 Ω | 4800 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped output voltage@8 Ω | 142 Vpeak | ||
| Current | 80 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 60 V - 264 V | ||
| Power consumption / current draw | |||
| Idle | 115 V: 30.3 W - 0.34 A | 230 V: 31.0 W - 0.32 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 777 W - 7.0 A | 230 V: 753 W - 3.9 A | |
| THERMAL | |||
| Operating temperature range | 0° - 45° C - 32° - 113° F | ||
| Thermal dissipation* | |||
| Idle | 115 V: 103 BTU/h | 230 V: 106 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 606 BTU/h | 230 V: 522 BTU/h | |
