OTTOCANALI 12K4 DSP+D

12000W/8-channel Flexible Amplifier with DSP and Dante™

Powersoft 8ch
2 rack unit space
SRM
PFC
Safety-Reliability
EN54
Audio Network
Routing Channel
DSP On Board
ArmoniaPlus
GreenPower
MyPowersoft

Overview

The Ottocanali 12K4 DSP+D is a flexible and reliable 8-channel power amplifier with up to a total of 12,000 W at 4Ω, ideal for multi-zone applications in medium to large-scale installs: Ottocanali 12K4 DSP+D supports any combination of lo-Z loudspeakers, mono-bridgeable channel pairs and 70V/100V Hi-Z distributed lines with no need for output step-up transformers. The Ottocanali 12K4 DSP+D features switchable main/aux signal inputs and offers a wide range of system control, alarms, GPI/O and monitoring functions as well as sound shaping options.

The Ottocanali 12K4 DSP+D implements universal switch mode power supplies with PFC and patented SRM (Smart Rails Management) technology maximizing reliability & efficiency and reducing power consumption.

New Ottocanali 12K4 DSP+D heralds new and innovative level of signal processing. Providing flexible routing and mixing, multi-stage equalization with raised-cosine, IIR and FIR filters, delay up to 2 s in input processing and 100 ms for time alignment, gain and polarity adjustment, crossover, peak limiters, TruePower™ limiters and Active DampingControl™.

Powersoft’s legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum: the Ottocanali 12K4 DSP+D shines with outstandingly low power consumption and heat dissipation. This dramatically reduces costs from the AC mains supply and air conditioning/cooling systems – not to mention the benefits to the environment for a greener planet.

MyPowersoft services are available for this product.

Features

Power supply

  • Universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
  • Patented output filter with ripple cancellation network
  • Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
  • Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket

Protections

Fully protected circuit design with:

  • Ac protection: shut down power supply when AC mains voltage is outside operating range
  • Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
  • DC protection: protects against infrasonic signal at the outputs
  • VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
  • Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
  • Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
  • Thermal protection: output stages operating temperature up to 80 °C (176 °F)
  • Temperature controlled continuous variable speed fan, front to back airflow

General

  • Fixed frequency switch mode output stage for high grade sound accuracy
  • All models 2 RU for reduced rack cost and space
  • Light weight – for easier racking and shipping: 14 kg / 30.8 lbs
  • Standard Phoenix connectors: analog and digital input, audio outputs, aux supply, alarms and GPIO
  • Remotely switchable double input

Loudspeaker system configuration

  • Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
  • Switchable 35Hz / 70Hz high pass filter per channel
  • Mixed configuration with Lo-Z/Hi-Z systems possible
  • Bridged mode, with low impedance, per channel pair

Processing

  • TI C6000 DSP platform architecture
  • AD/DA converter: dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channel
  • Input/output independent equalizers per channel providing Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Crossovers: linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
  • Input delay up to 2s and output delay up to 100ms for time alignment per channel
  • Active DampingControl™ for cable compensation
  • Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter

Alarms and GPIO

  • Configurable alarm contact NC/NO per channel
  • Remote AUX input/MAIN input switch
  • Remote ON/OFF switch
  • PWS OUT connector providing up to 24VDC

Remote management

  • Control and monitoring through ArmoníaPlus

Specifications

General
Output power per channel
Output power per channel1000 W @ 2 Ω1500 W @ 4 Ω850 W @ 8 Ω
Bridge mode2000 W @ 4 Ω3000 W @ 8 Ω
Max output voltage / current
Max unclipped voltage @8 Ω116.6 Vpeak
Bridge mode45 Apeak
AC main power
Power supplyUniversal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement100-240 V ±10%, 50-60 Hz
Operating voltage90 V – 264 V
Power consumption/current draw
Idle115 V: 74 W – 0.85 A230 V: 77 W – 0.75 A
1/8 of max output power @ 4 Ω115 V: 2075 W – 18.5 A230 V: 2115 W – 9.7 A
THERMAL
Operating temperature range0° – 35° C – 32° – 95° F
Thermal dissipation*
Idle115 V: 160 BTU/h – 41 kcal/h230 V: 170 BTU/h – 43 kcal/h
1/8 of max output power @ 4 Ω115 V: 253 BTU/h – 64 kcal/h/h230 V: 263 BTU/h – 66 kcal/h
1/4 of max output power @ 4 Ω115 V: 4283 BTU/h – 1080 kcal/h230 V: 3874 BTU/h – 977 kcal/h

Arts & Theatres

Bar/Restaurants

Clubs

Convention Centers

Hospitality

Houses of Worship

Malls & Shopping Centres

Related case studies

Ottocanali and Quattrocanali Add Power and Reliability to Bucharest’s Hard Rock Café

Ottocanali and Quattrocanali Add Power and Reliability to Bucharest’s Hard Rock Café

Florence (Italy), 19 March 2018 – In need of an audio infrastructure upgrade, Bucharest’s Hard Rock Café, the iconic food haven for rock ‘n’ Roll fans everywhere, turned to Romanian integrator, Parad…

More info