Quattrocanali系列适用于低阻（低至2Ω）以及 70V/100V 分布式线路系统，也适用于高阻和低阻输出负载混合的应用，是各类固定安装扩声系统的合适之选。 Quattrocanal 的DSP 版本可通过 ArmoníaPlus 进行深度控制和监视，定制声音和管理系统可以在远程的分布式地点进行。 此功放平台还适用于火警系统等任务关键性应用，因为它的电源经过精心设计，即便连接 UPS 也可以保证可靠运行。 此产品提供MyPowersoft服务 电源 专利输出滤波器，带纹波消除网络 低浪涌限制减少了交流电浪涌电流，无需额外购买昂贵的电源时序器 可拆卸交流电源线缆，带 IEC C19/22. 2 插座（16A 适用于欧洲，20A 适用于美国） 保护 全面的保护电路： 交流保护：当交流电源电压超出操作范围时，关闭电源 削波限幅器：防止严重削波的波形到达扬声器，同时维持全峰值电源输出功率 直流保护：防止输出端出现次声信号 甚高频保护：防止无法被听见的强烈非音乐高频信号到达扬声器 短路保护：自动保护重置功能防止功放发生短路，或输出电路发生其它应激故障 Long term 限幅器：保护扬声器免受稳定的长期RMS(非音频)信号减少最大输出 热保护：输出级操作温度最高为 80 °C (176 °F) 温控连续变速风扇，从前到后气流冷却 温度预测，带回溯历史事件的 LCD 显示屏 常规 固定频率开关模式输出级，实现高品质声音精度 尺寸紧凑，所有型号为1RU，节了机架成本和空间 重量轻 – 方便机架安装和装运：7 kg （15. 4磅） 标准凤凰接头：用于模拟音频输出、辅助供电、警报器和通用输入输出 每个通道都有可用远程开关控制的双输入（主输入和辅助输入） 设置 每通道内置可关闭的削波限幅器 数字增益衰减器控制 每通道具有可关闭的门限选择 用户可选增益/ 灵敏度 每通道具有用户可选的最大输出功率 用户可选的最大电流消耗 通过用户可选的访问键控代码锁定设置 通过 RS-485 界面进行远程控制，提供全诊断、操作设置和系统监控 数字信号处理 TI C6000 DSP平台架构 AD / DA 转换器：双 24bit @96 kHz Tandem®架构 每个通道单独的输入输出均衡器提参数均衡、升余弦、搁架IIR滤波器以及自定义 FIR 可调式延时高达 100ms、用于时间对准 主动阻尼控制™、用于线径补偿 TruePower™、RMS电压、RMS电流、峰值限幅器 远程管理 通过软件： 通过 ArmoníaPlus 进行控制和诊断监控 专有网页 App 应用软件 通过硬件： 衰减 （从 0dB 到 26dB） 高通滤波器（35Hz，70Hz） Lo-Z / Hi-Z / 70V / 10
为不间断运行而设计
Powersoft’s DSP implements a complete audio management system that provides a unique level of control and can be used to set the tone of any space.
In any amplifier output stage, the efficiency is a function of the difference in the output voltage delivered to the load and the rails voltage delivered from the power supply.
Controlling and monitoring of a Powersoft amplifier can be done through ArmoníaPlus.
Power Sharing enables part of the power to be shared across all output channels so that it can be used where it is needed the most.
Our current line of amplifier offers Dante™ either as standard or as an option on any model, for audio over IP networking.
With modern systems growing larger in size, the resistance that is added by lengthy cable runs starts to become an issue.
Quattrocanali 系列 - all models
| Model | Total power | Per channel | Channels | Form factor | AoIP |
|---|---|---|---|---|---|
| QUATTROCANALI 4804 DSP+ | 4800 W | 1500 W @ 2 Ω 1200 W @ 4 Ω 1200 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 2404 DSP+D | 2400 W | 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 2404 DSP+ | 2400 W | 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 1204 DSP+ | 1200 W | 400 W @ 2 Ω 300 W @ 4 Ω 300 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 4804 DSP+D | 4800 W | 1500 W @ 2 Ω 1200 W @ 4 Ω 1200 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 4804 DSP | 4800 W | 1500 W @ 2 Ω 1200 W @ 4 Ω 1200 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 4804 | 4800 W | 1500 W @ 2 Ω 1200 W @ 4 Ω 1200 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 2404 DSP | 2400 W | 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 2404 | 2400 W | 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 1204 DSP | 1200 W | 400 W @ 2 Ω 300 W @ 4 Ω 300 W @ 8 Ω | 4 | - | - |
| QUATTROCANALI 1204 DSP+D | 1200 W | 400 W @ 2 Ω 300 W @ 4 Ω 300 W @ 8 Ω | 4 | - | Dante / AES67 |
| QUATTROCANALI 1204 | 1200 W | 400 W @ 2 Ω 300 W @ 4 Ω 300 W @ 8 Ω | 4 | - | - |
特点
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User selectable gain/sensitivity
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Lockable set-up by user selectable access key code
- Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
- TI C6000 DSP platform
- AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
- Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
- Delay up to 100 ms for time alignment
- Active DampingControl™ for cable compensation
- Peak, RMS voltage, RMS current, TruePower™ limiters
- Control and diagnostics monitoring via ArmoníaPlus
- Dedicated WebApp
- Attenuation (from 0dB to 26dB)
- High-pass filters (35Hz, 70Hz)
- Lo-Z/Hi-Z/70V/100V output selection
- Adjustable gain (from 26dB to 35 dB)
规格
| Output power per Channel | |||
|---|---|---|---|
| Output power per Channel | 1500 W @ 2 Ω | 1200 W @ 4 Ω | 1200 W @ 8 Ω |
| Bridge mode | 3000 W @ 4 Ω | 2400 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped voltage @8 Ω | 139 Vpeak | ||
| Current | 45 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V - 264 V | ||
| Power consumption/current draw | |||
| Idle | 115 V: 31.3 W - 0.47 A | 230 V: 31.6 W - 0.27 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 823 W - 7.7 A | 230 V: 840 W - 4.3 A | |
| THERMAL | |||
| Operating temperature range | 0° - 45° C - 32° - 113° F | ||
| Thermal dissipation* | |||
| Idle | 115 V: 107 BTU/h | 230 V: 108 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 760 BTU/h | 230 V: 818 BTU/h | |
