Quattrocanali 系列适用于低阻（低至2Ω）以及 70V/100V 分布式线路系统，也适用于高阻和低阻输出负载混合的应用，是各类固定安装扩声系统的合适之选。 此功放平台还适用于火警系统等任务关键性应用，因为它的电源经过精心设计，即便连接UPS也可以保证可靠运行。 此产品提供MyPowersoft服务 电源 Powersoft 传奇的通用开关模式电源，最高可承受 400VAC 交流电，带功率因数校正 低浪涌限制减少了交流电浪涌电流，无需额外购买昂贵的电源时序器 可拆卸交流电源线缆，带 IEC C19/22. 2 插座（16A 适用于欧洲，20A适用于美国） 保护 全面的保护电路： 交流保护：当交流电源电压超出操作范围时，关闭电源 削波限幅器：防止严重削波的波形到达扬声器，同时维持全峰值电源输出功率 直流保护：防止输出端出现次声信号 甚高频保护：防止无法被听见的强烈非音乐高频信号到达扬声器 短路保护：自动保护重置功能防止功放发生短路，或输出电路发生其它应激故障 Long term 限幅器：保护扬声器免受稳定的长期RMS(非音频)信号减少最大输出 热保护：输出级操作温度最高为 80 °C (176 °F) 温控连续变速风扇，从前到后气流冷却 温度预测，带回溯历史事件的 LCD 显示屏 常规 固定频率开关模式输出级，实现高品质声音精度 尺寸紧凑，所有型号为1RU，节省了机架成本间 重量轻 – 方便机架安装和装运：7 kg （15. 4磅） 标准凤凰接头：用于模拟音频输出、辅助供电、警报器和通用输入输出 每个通道都有可用远程开关控制的双输入（主输入和辅助输入） 设置 每通道内置可关闭的削波限幅器 数字增益衰减器控制 每通道具有可关闭的门限选择 用户可选增益/ 灵敏度 每通道具有用户可选的最大输出功率 用户可选的最大电流消耗 通过用户可选的访问键控代码锁定设置 通过RS-485界面进行远程控制，提供全诊断、操作设置和系统监控 警报器和通用输入输出 每个通道可配置的常开/常闭触点，用于警报通知 远程开关 每个通道可配置的远程 VCA 控制 远程监控 通过软件： 衰减 （从 0dB 到 26dB） 最大输出电压 诊断（温度，风扇等） 通过硬件： 衰减 （从 0dB 到 26dB） 高通滤波器（35Hz，70Hz） Lo-Z / Hi-Z / 70V / 100V 输出选择 可调增益（从 26dB 到 35dB） General Output power per Channel Output power per Channel 800 W @ 2 Ω 600 W @ 4 Ω 600 W @ 8 Ω Bridge mode 1600 W @ 4 Ω 1200 W @ 8 Ω M
| Model | Available Versions | Total Power |
|---|---|---|
| Quattrocanali 1204 | DSP / DSP+ / DSP+D | 1200 W |
| Quattrocanali 2404 | DSP / DSP+ / DSP+D | 2400 W |
| Quattrocanali 4804 | DSP / DSP+ / DSP+D | 4800 W |
| Quattrocanali 8804 | DSP / DSP+ / DSP+D | 9600 W |
DSP: with integrated DSP DSP+: with DSP and AES67 support DSP+D: with DSP and Dante support For more information and details on Power Sharing capabilities, please refer to the data sheets.
特点
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User selectable gain/sensitivity
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Lockable set-up by user selectable access key code
- Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
- NC/NO contacts per channel for alarm notifications
- Remote ON/OFF switch
- Remote VCA control per channel
- Attenuation (from 0 dB to 26 dB)
- Max output voltage
- Output and gain reduction metering
- Diagnostics (temperature, fans,...)
- Attenuation (from 0dB to 26dB)
- High-pass filters (35Hz, 70Hz)
- Lo-Z/Hi-Z/70V/100V output selection
- Adjustable gain (from 26dB to 35 dB)
规格
| Output power per Channel | |||
|---|---|---|---|
| Output power per Channel | 800 W @ 2 Ω | 600 W @ 4 Ω | 600 W @ 8 Ω |
| Bridge mode | 1600 W @ 4 Ω | 1200 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped voltage @8 Ω | 100 Vpeak | ||
| Current | 45 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V - 264 V | ||
| Power consumption/current draw | |||
| Idle | 115 V: 31 W - 0.45 A | 230 V: 31.8 W - 0.26 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 406 W -2.1 A | 230 V: 438 W - 2.39 A | |
| THERMAL | |||
| Operating temperature range | 0° - 45° C - 32° - 113° F | ||
| Thermal dissipation* | |||
| Idle | 115 V: 107 BTU/h | 230 V: 109 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 361 BTU/h | 230 V: 361 BTU/h | |
