OTTOCANALI 1204 DSP

1200W/8-channel Flexible Amplifier with DSP

概要モデル特徴仕様ダウンロード関連情報関連ケーススタディ

概要

The Ottocanali 1204 DSP, includes DSP functionality for all 8 channels, paired with Ethernet connectivity for full control and monitoring through the ArmoníaPlus. Stand-alone in corporate board rooms, or along with Powersoft’s Installation models in the largest setups, the Ottocanali 1204 DSP with Ethernet fits any venue. Compliant with IEC 60849, the Ottocanali 1204 DSP matches the crucial requirements for sound systems for emergency purposes. MyPowersoft services are available for this product.

モデル

Ottocanali 1204 Series - all models

Model	Total power	Per channel	Channels	Form factor	AoIP
OTTOCANALI 1204	1200 W	150 W @ 4 Ω 80 W @ 8 Ω	8	1 RU	-
OTTOCANALI 1204 DSP	1200 W	150 W @ 4 Ω 80 W @ 8 Ω	8	1 RU	-

特徴

Universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continous variable speed fan, front to back airflow
Fixed frequency switchmode output stage for high-grade sound accuracy
Compact 1 RU for reduced rack cost and space
Lightweight - for easier racking and shipping: 5-11 kg (11-24.3 lbs) depending on the number of BatFormers
Standard Phoenix connectors: analog and digital input, audio outputs, aux supply, alarms, and GPIO
Remotely switchable inputs (main and aux) per channel
Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
Switchable 35Hz / 70Hz high pass filter per channel
Built-in defeatable clip limiters for each channel
Mixed configuration with Lo-Z/Hi-Z systems is possible
Bridged mode low impedance per channel pair
General Purpose Input/Output alarm interfaces dangerous DC in the output power signal
thermal stress
Configurable alarm contact NC/NO per channel
Remote AUX input / MAIN input switch
Remote ON/OFF switch
PWS OUT connector providing up to 24VDC
Analog Devices® ADAU 1702 DSP architecture
AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture, 100 dB dynamic range, per channel
Input/output independent equalizers per channel providing PEQ, shelving IIR filters
Delay up to 16 ms for time alignment
Active DampingControl™ for cable compensation
Peak and RMS limiters
Control and monitoring through ArmoníaPlus
Interface available for MediaMatrix, Crestron, AMX, Q-SYS, and monitoring systems

仕様

Output power per channel
Output power per channel	150 W @ 4 Ω	80 W @ 8 Ω
Bridge mode	300 W @ 8 Ω	150 W @ 16 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω	37 Vpeak
Current	15 Apeak
AC main power
Power supply	Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement	100-240 V ±10%, 50-60 Hz
Operating voltage	90 V - 264 V
Power consumption/current draw
Idle	115 V: 20 W - 0.33 A	230 V: 21.2 W - 0.36 A
1/8 of max output power @ 4 Ω	115 V: 224 W - 1.99 A	230 V: 223 W - 1.24 A
1/4 of max output power @ 4 Ω	115 V: 423 W - 3.70 A	230 V: 417 W - 2.00 A
THERMAL
Operating temperature range	0° - 35° C - 32° - 95° F
Thermal dissipation*
Idle Energy save ON	115 V: 29.66 BTU/h - 7.48 kcal/h	230 V: 31.71 BTU/h - 8 kcal/h
1/8 of max output power @ 4 Ω	115 V: 252.34 BTU/h -63.64 kcal/h	230 V: 248.93 BTU/h - 62.78 kcal/h
1/4 of max output power @ 4 Ω	115 V: 419.41 BTU/h -105.78 kcal/h	230 V: 398.97 BTU/h -100.62 kcal/h