Descripción generalModelosCaracterísticasEspecificacionesDescargasEstudios de casos relacionados
Descripción general
For Installed Sound Reinforcement systems, the Duecanali Series offers remarkably low power consumption and heat dissipation, in addition to Powersoft’s renowned audio quality and reliable performance - all in a compact, lightweight unit. The Duecanali is a Class D power amplification platform designed for larger 2-channel install applications. While all Duecanali versions deliver Powersoft’s renowned reliability and power density in a light, compact unit, Duecanali DSP+D versions also offer built in, state-of-the-art DSP, as well as Dante, providing additional system flexibility and extensive amplifier control.
| Model | Available Versions | Total Power |
|---|---|---|
| Duecanali 804 | DSP / DSP+ / DSP+D | 800 W |
| Duecanali 1604 | DSP / DSP+ / DSP+D | 1600 W |
| Duecanali 4804 | DSP / DSP+ / DSP+D | 4800 W |
| Duecanali 6404 | DSP / DSP+ / DSP+D | 6400 W |
DSP: with integrated DSP DSP+: with DSP and AES67 support DSP+D: with DSP and Dante support For more information and details on Power Sharing capabilities, please refer to the data sheets.
Características
- Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Lightweight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
- Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
- Switchable 35Hz / 70Hz high pass filter per channel
- Mixed configuration with Lo-Z/Hi-Z systems possible
- Bridged mode low impedance per channel pair
- NC/NO contacts per channel for alarm notifications
- Remote ON/OFF switch
- Remote VCA control per channel
- TI C6000 DSP platform
- AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
- Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
- Delay up to 100 ms for time alignment
- Active DampingControl™ for cable compensation
- Peak, RMS voltage, RMS current, TruePower™ limiters
- Control and diagnostics monitoring via ArmoníaPlus
- Dedicated WebApp
- Attenuation (from 0dB to 26dB)
- High-pass filters (35Hz, 70Hz)
- Lo-Z/Hi-Z/70V/100V output selection
- Adjustable gain (from 26dB to 35 dB)
Especificaciones
| Output power per Channel | |||
|---|---|---|---|
| Output power per Channel | 500 W @ 2 Ω | 400 W @ 4 Ω | 400 W @ 8 Ω |
| Bridge mode | 1000 W @ 4 Ω | 800 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped output voltage@8 Ω | 80 Vpeak | ||
| Current | 39 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V - 264 V | ||
| Power consumption / current draw | |||
| Idle | 115 V: 23.0 W - 0.34 A | 230 V: 22.5 W - 0.21 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 148 W - 1.4 A | 230 V: 147 W - 0.9 A | |
| THERMAL | |||
| Operating temperature range | 0° - 45° C - 32° - 113° F | ||
| Thermal dissipation | |||
| Idle | 115 V: 78 BTU/h | 230 V: 77 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 162 BTU/h | 230 V: 161 BTU/h | |
Descargas
Documentos y archivos
A&E specifications1
Brochures1
Certifications13
CCC Certificate 2017010802984031CE Verification of Conformity AT-EMC-838-0522ACE Verification of Conformity AT-LVD-838-0222AFCC Supplier’s Declaration of Conformity SDoC Powersoft - Duecanali SeriesREACH Declaration of ConformityRoHsChina Declaration of ConformityRoHsCE Declaration of Conformity PowersoftEPA Declaration of Conformity PowersoftUK Declaration of Conformity DoC Powersoft - Duecanali SeriesCSA Certificate 80023853Declaration of Conformity DoC Powersoft - Duecanali SeriesCPR Certificate 0560-CPR-182190006CB Certificate NL-102706
Data sheets3
Mechanical drawings1
Technical notes10
Application Note - Limiters: basic concept and operationsApplication Note - VCA Operation and remote Off GPIApplication Note - Powersoft Amplifiers and AoIP (Dante-AES67)Application Note - HealthPlusApplication Note - Amplifiers Backup strategy and Startup timesApplication Note - Line Integrity Monitoring and Pilot TonesApplication Note - Web App for Powersoft AmplifiersApplication Note - Power SharingApplication Note - Interactive Tuning Plugin | Armonía PluginApplication Note - Damping Control
Estudios de casos relacionadosCatálogo completo→
