电源 先进开关模式电源技术，带来高性能和小巧体积 固定频率开关模式输出 专利输出滤波器，带波纹消除网络rk 保护 全面的保护电路设计： 交流保护：当交流电源电压超出操作范围时，关闭电源 削波限幅器：防止严重削波的波形到达扬声器，同时维持全峰值电源输出功率 直流保护：防止输出端出现次声信号 甚高频保护：防止听不见的强烈非音乐高频信号到达扬声器 短路保护：自动保护重置功能防止功放发生短路，或输出电路发生其它应激故障 长期限幅器：防止会减少最大输出的稳定的长期RMS（非音频）信号到达扬声器 热保护：输出级操作温度最高为75 °C (167 °F) 温控连续变速风扇，从前到后的空气流动w 数字信号处理 Analog Devices ADAU 1701数字信号处理器架构 24bit @ 48 kHz，信噪比为120 dB的模拟到数字/数字到模拟转换器 每个通道都有输入/输出独立均衡器，多个不同种类滤波器，最高可达48 dB/倍频程 峰值、RMS以及取决于频率的限幅器 延时用于时间对准t 常规 体积小巧 – 所有的型号只需1U的机架安装空间，节省了机架成本和空间 重量轻 – 机架安装和装运更轻松：所有的型号都只有7. 4 千克（16磅） Neutrik XLR平衡输入，带环通XLR和Speakon输出接口 嵌入步进式衰减器 模块化结构y 远程管理 通过ArmoníaPlus软件监控 可连接至MediaMatrix, Crestron, AMXcontrol, Q-SYS和监控系统 General Output power per channel Output power per channel 1200 W @ 4 Ω 600 W @ 8 Ω Bridge mode 2400 W @ 8 Ω Max output voltage / current Single channel mode 116 Vpeak / 65 Apeak Bridge mode 232 Vpeak AC main power Power supply Universal, regulated switch mode with PFC (Power Factor Correction) Nominal power requirement 100-240 V ±10%, 50-60 Hz Operating voltage 90 V - 264 V Power consumption /current draw Idle 115 V: 35 W - 0. 6 A 230 V: 35 W - 0. 3 A 1/8 of max output power @ 4 Ω 115 V: 371 W - 5 A 230 V: 371 W - 2. 54 A 1/4 of max output power @ 4
M Series - all models
| Model | Total power | Per channel | Channels | Form factor | AoIP |
|---|---|---|---|---|---|
| M50Q HDSP+ETH | - | 700 W @ 4 Ω 360 W @ 8 Ω | 4 | - | - |
| M50Q | - | 1250 W @ 4 Ω 750 W @ 8 Ω | 4 | 1 RU | - |
| M28Q HDSP+ETH | - | 700 W @ 4 Ω 360 W @ 8 Ω | 4 | - | - |
| M28Q | - | 700 W @ 4 Ω 360 W @ 8 Ω | 4 | 1 RU | - |
| M30D HDSP+ETH | - | 1500 W @ 4 Ω 900 W @ 8 Ω | 2 | - | - |
| M30D | - | 1500 W @ 4 Ω 900 W @ 8 Ω | 2 | 1 RU | - |
| M20D HDSP+ETH | - | 1200 W @ 4 Ω 600 W @ 8 Ω | 2 | - | - |
| M20D | - | 1200 W @ 4 Ω 600 W @ 8 Ω | 2 | 1 RU | - |
| M14D HDSP+ETH | - | 700 W @ 4 Ω 360 W @ 8 Ω | 2 | - | - |
| M14D | - | 700 W @ 4 Ω 360 W @ 8 Ω | 2 | 1 RU | - |
特点
- Advanced switch-mode power supply technology for high performance and compact size
- Fixed frequency switch mode output
- Patented output filter with ripple cancellation network
- Ac protection: shut down power supply when AC mains voltage is outside the operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals reducing maximum output
- Thermal protection: output stages operating temperature up to 75 °C (167 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Analog Devices ADAU 1701 DSP architecture
- 24 bit @ 48 kHz, 120 dB S/N AD/DA converters
- Separate input/output EQ’s with numerous filters of various types up to 48 dB/oct
- Peak, RMS, and frequency-dependent limiters
- Delay for time alignment
- Direct drive constant voltage, 70V Hi-Z distributed lines*
- Compact size - all models only 1 RU for reduced rack cost and space
- Lightweight - all models only 7.4 kg (16.3 pounds) for easier racking and shipping
- Neutrik XLR balanced inputs with loop thru XLR and Speakon outputs connectors
- Recessed stepped attenuators
- Modular construction
- Full four years warranty
- Control and monitoring through ArmoníaPlus
- Interface available for MediaMatrix, Crestron, AMX, Q-SYS control, and monitoring systems
规格
| Output power per channel | ||
|---|---|---|
| Output power per channel | 1200 W @ 4 Ω | 600 W @ 8 Ω |
| Bridge mode | 2400 W @ 8 Ω | |
| Max output voltage / current | ||
| Single channel mode | 116 Vpeak / 65 Apeak | |
| Bridge mode | 232 Vpeak | |
| AC main power | ||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | |
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | |
| Operating voltage | 90 V - 264 V | |
| Power consumption /current draw | ||
| Idle | 115 V: 35 W - 0.6 A | 230 V: 35 W - 0.3 A |
| 1/8 of max output power @ 4 Ω | 115 V: 371 W - 5 A | 230 V: 371 W - 2.54 A |
| 1/4 of max output power @ 4 Ω | 115 V: 701 W - 9 A | 230 V: 701 W - 4.5 A |
| THERMAL | ||
| Operating temperature range | 0° - 45° C - 32° - 113° F | |
| Thermal dissipation* | ||
| Idle | 115 V: 126 BTU/h - 31.8 kcal/h | 230 V: 126 BTU/h - 31.8 kcal/h |
| 1/8 of max output power @ 4 Ω | 115 V: 529 BTU/h - 133.3 kcal/h | 230 V: 529 BTU/h - 133.3 kcal/h |
| 1/4 of max output power @ 4 Ω | 115 V: 935 BTU/h - 235.6 kcal/h | 230 V: 935 BTU/h - 235.6 kcal/h |
* = HDSP+ETH version with HPF and output voltage limiter preset / external HPF and output voltage limiter required with no-HDSP+ETH version.
