2 插座（16A 适用于欧洲，20A 适用于美国） 保护 全面的保护电路： 交流保护：当交流电源电压超出操作范围时，关闭电源 削波限幅器：防止严重削波的波形到达扬声器，同时维持全峰值电源输出功率 直流保护：防止输出端出现次声信号 甚高频保护：防止无法听见的强烈非音乐高频信号到达扬声器 短路保护：自动保护重置功能防止功放发生短路，或输出电路发生其它应激故障 Long term 限幅器：保护扬声器免受稳定的长期 RMS (非音频)信号减少最大输出 热保护：输出级操作温度最高为 80 °C (176 °F) 温控连续变速风扇，从前到后气流冷却 温度预测，带回溯历史事件的 LCD 显示屏 常规 固定频率开关模式输出级，实现高品质声音精度 尺寸紧凑，所有型号为1RU，节省了机架成本间 重量轻 – 方便机架安装和装运：7 kg （15. 4磅） 标准凤凰接头：用于模拟音频输出，辅助供电，警报器和通用输入输出 每个通道都有可用远程开关控制的双输入（主输入和辅助输入） 扬声器系统配置 直接驱动低阻抗负载或 70V/100V 高阻分布式线路 每个通道有可用开关切换的 35Hz/70Hz 高通滤波器 可以与低阻和高阻系统混合配置 低阻模式通道可桥接 警报器和通用输入输出 每个通道可配置的常开/常闭触点，用于警报通知 远程开关 每个通道可配置的远程 VCA 控制 远程管理 通过软件： 衰减 （从 0dB 到 26dB） 可调最大输出电压 输出和增益衰减电平显示 诊断（温度，风扇等） 通过硬件： 衰减 （从 0dB 到 26dB） 高通滤波器（35Hz，70Hz） Lo-Z / Hi-Z / 70V / 100V 输出选择 可调增益（从 26dB 到 35dB General Output power per Channel Output power per Channel 3000 W @ 2 Ω 2400 W @ 4 Ω 1250 W @ 8 Ω Bridge mode 6000 W @ 4 Ω 4800 W @ 8 Ω Max output voltage / current Max unclipped output voltage@8 Ω 142 Vpeak Current 80 Apeak AC main power Power supply Universal, regulated switch mode with PFC (Power Factor Correction) Nominal power requirement 100-240 V ±10%, 50-60 Hz Operating voltage 60 V - 264 V Power consumption / current dra
Duecanali Series - all models
| Model | Total power | Per channel | Channels | Form factor | AoIP |
|---|---|---|---|---|---|
| DUECANALI 4804 DSP+ | 4800 W | 3000 W @ 2 Ω 2400 W @ 4 Ω 1250 W @ 8 Ω | 2 | - | Dante / AES67 |
| DUECANALI 1604 DSP+ | 1600 W | 1000 W @ 2 Ω 800 W @ 4 Ω 800 W @ 8 Ω | 2 | - | Dante / AES67 |
| DUECANALI 804 DSP+ | 800 W | 500 W @ 2 Ω 400 W @ 4 Ω 400 W @ 8 Ω | 2 | - | Dante / AES67 |
| DUECANALI 4804 DSP+D | 4800 W | 3000 W @ 2 Ω 2400 W @ 4 Ω 1250 W @ 8 Ω | 2 | - | Dante / AES67 |
| DUECANALI 4804 DSP | 4800 W | 3000 W @ 2 Ω 2400 W @ 4 Ω 1250 W @ 8 Ω | 2 | - | - |
| DUECANALI 4804 | 4800 W | 3000 W @ 2 Ω 2400 W @ 4 Ω 1250 W @ 8 Ω | 2 | - | - |
| DUECANALI 1604 DSP+D | 1600 W | 1000 W @ 2 Ω 800 W @ 4 Ω 800 W @ 8 Ω | 2 | - | Dante / AES67 |
| DUECANALI 1604 DSP | 1600 W | 1000 W @ 2 Ω 800 W @ 4 Ω 800 W @ 8 Ω | 2 | - | - |
| DUECANALI 1604 | 1600 W | 1000 W @ 2 Ω 800 W @ 4 Ω 800 W @ 8 Ω | 2 | - | - |
| DUECANALI 804 DSP | 800 W | 500 W @ 2 Ω 400 W @ 4 Ω 400 W @ 8 Ω | 2 | - | - |
| DUECANALI 804 DSP+D | 800 W | 500 W @ 2 Ω 400 W @ 4 Ω 400 W @ 8 Ω | 2 | - | Dante / AES67 |
| DUECANALI 804 | 800 W | 500 W @ 2 Ω 400 W @ 4 Ω 400 W @ 8 Ω | 2 | - | - |
特点
- Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside the operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
- Fixed frequency switchmode output stage for high-grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Lightweight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
- Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
- Switchable 35Hz / 70Hz high pass filter per channel
- Mixed configuration with Lo-Z/Hi-Z systems possible
- Bridged mode low impedance per channel pair
- NC/NO contacts per channel for alarm notifications
- Remote ON/OFF switch
- Remote VCA control per channel
- Attenuation (from 0 dB to 26 dB)
- Max output voltage
- Output and gain reduction metering
- Diagnostics (temperature, fans,...)
- Attenuation (from 0 dB to 26 dB)
- High Pass Filter (35 Hz, 70 Hz)
- LoZ/HiZ/70V/100V output selection
- Gain (from 26 dB to 35 dB)
规格
| Output power per Channel | |||
|---|---|---|---|
| Output power per Channel | 3000 W @ 2 Ω | 2400 W @ 4 Ω | 1250 W @ 8 Ω |
| Bridge mode | 6000 W @ 4 Ω | 4800 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped output voltage@8 Ω | 142 Vpeak | ||
| Current | 80 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 60 V - 264 V | ||
| Power consumption / current draw | |||
| Idle | 115 V: 30.3 W - 0.34 A | 230 V: 31.0 W - 0.32 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 777 W - 7.0 A | 230 V: 753 W - 3.9 A | |
| THERMAL | |||
| Operating temperature range | 0° - 45° C - 32° - 113° F | ||
| Thermal dissipation* | |||
| Idle | 115 V: 103 BTU/h | 230 V: 106 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 606 BTU/h | 230 V: 522 BTU/h | |
