Quattrocanali está diseñado para funcionar con baja impedancia (desde 2 Ω) y con líneas distribuidas de 70 V / 100 V: cualquier carga de salida de impedancia mezclada puede ser realizada. Este amplificador también puede ser usado en aplicaciones cruciales, tales como sistemas de alarma de incendio, gracias a la fuente de potencia diseñada inteligentemente que permite operación confiable inclusive cuando conectada a un sistema de alimentación ininterrumpida. Los servicios de MyPowersoft están disponibles para este producto. Fuente de Potencia Fuente Universal Conmutable con tolerancia de hasta 400VAC a la entrada con Factor Corrector de Potencia (PFC) La limitación de consumo de corriente inicial en AC remueve la necesidad de costosos secuenciadores de encendido Cable de Ac desmontable con clavija IEC C19/22. 2 (16A para UE, 20 A para USA) Protecciones Diseño de circuito completamente protegido en: Protección AC: apagado de fuente de potencia cuando el voltaje de energía AC está fuera del rango operativo Limitador Clipeo: previene que las formas de onda con clipping severo lleguen a los altoparlantes, mientras se mantiene una salida de potencia pico total Protección DC: protege
| Model | Available Versions | Total Power |
|---|---|---|
| Quattrocanali 1204 | DSP / DSP+ / DSP+D | 1200 W |
| Quattrocanali 2404 | DSP / DSP+ / DSP+D | 2400 W |
| Quattrocanali 4804 | DSP / DSP+ / DSP+D | 4800 W |
| Quattrocanali 8804 | DSP / DSP+ / DSP+D | 9600 W |
DSP: with integrated DSP DSP+: with DSP and AES67 support DSP+D: with DSP and Dante support For more information and details on Power Sharing capabilities, please refer to the data sheets.
Características
- Powersoft legendary universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Temperature forecast with LCD traced historical behavior
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
- Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input (main and aux) per channel
- Built-in defeatable clip limiters for each channel
- Digital gain-attenuator control
- Defeatable gate selection for each channel
- User selectable gain/sensitivity
- NC/NO contacts per channel for alarm notifications
- Remote ON/OFF switch
- Remote VCA control per channel
- Attenuation (from 0 dB to 26 dB)
- Max output voltage
- Output and gain reduction metering
- Diagnostics (temperature, fans,...)
- Attenuation (from 0dB to 26dB)
- High-pass filters (35Hz, 70Hz)
- Lo-Z/Hi-Z/70V/100V output selection
- Adjustable gain (from 26dB to 35 dB)
Especificaciones
| Output power per Channel | |||
|---|---|---|---|
| Output power per Channel | 1500 W @ 2 Ω | 1200 W @ 4 Ω | 1200 W @ 8 Ω |
| Bridge mode | 3000 W @ 4 Ω | 2400 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped voltage @8 Ω | 139 Vpeak | ||
| Current | 45 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V - 264 V | ||
| Power consumption/current draw | |||
| Idle | 115 V: 31 W - 0.47 A | 230 V: 32 W - 0.28 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 823 W - 7.7 A | 230 V: 840 W - 4.3 A | |
| THERMAL | |||
| Operating temperature range | 0° - 45° C - 32° - 113° F | ||
| Thermal dissipation* | |||
| Idle | 115 V: 106 BTU/h | 230 V: 107 BTU/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 759 BTU/h | 230 V: 840 BTU/h | |
