El nuevo Ottocanali 4K4 DSP + D anuncia un nuevo e innovador nivel de procesamiento de señales. Proporcionando enrutamiento y mezcla flexible, ecualización de múltiples etapas con coseno elevado, filtros IIR y FIR, retraso de hasta 2 s en el procesamiento de entrada y 100 ms para alineación de tiempo, ajuste de ganancia y polaridad, crossover, limitadores de pico, TruePower™ limitadores de Control de Damping Activo™. La legendaria eficiencia de Powersoft ahorra energía valiosa, manteniendo al mínimo el costo operativo y la "huella de carbono": Ottocanali 4K4 brilla con un consumo de energía y disipación de calor excepcionalmente bajos. Esto reduce drásticamente los costos del suministro de la red de CA y los sistemas de aire acondicionado / enfriamiento, sin mencionar los beneficios para el medio ambiente para un planeta más verde. Los servicios de MyPowersoft están disponibles para este producto. Fuente de Alimentación Fuente Universal Conmutable con tolerancia de hasta 400VAC a la entrada con Factor Corrector de Potencia (PFC) Filtros de Salida Patentados que cancela el efecto de ondas de ripeo (ripple) en la red eléctrica La limitación de consumo de corriente inicial en AC
Diseñado para no detenerse
Powersoft’s DSP implements a complete audio management system that provides a unique level of control and can be used to set the tone of any space.
Our current line of amplifier offers Dante™ either as standard or as an option on any model, for audio over IP networking.
Powersoft has always been very focused on energy saving and the use of the Power Factor Correction (PFC) has been a trademark for improving performance and containing mains current draw and consumption.
In any amplifier output stage, the efficiency is a function of the difference in the output voltage delivered to the load and the rails voltage delivered from the power supply.
Power Sharing enables part of the power to be shared across all output channels so that it can be used where it is needed the most.
With modern systems growing larger in size, the resistance that is added by lengthy cable runs starts to become an issue.
Serie Ottocanali - all models
| Model | Total power | Per channel | Channels | Form factor | AoIP |
|---|---|---|---|---|---|
| OTTOCANALI 12K4 DSP+D | 12000 W | 1000 W @ 2 Ω 1500 W @ 4 Ω 850 W @ 8 Ω | 8 | - | Dante / AES67 |
| OTTOCANALI 12K4 | 12000 W | 1000 W @ 2 Ω 1500 W @ 4 Ω 850 W @ 8 Ω | 8 | - | - |
| OTTOCANALI 8K4 DSP+D | 8000 W | 850 W @ 2 Ω 1000 W @ 4 Ω 600 W @ 8 Ω | 8 | - | Dante / AES67 |
| OTTOCANALI 8K4 | 8000 W | 850 W @ 2 Ω 1000 W @ 4 Ω 600 W @ 8 Ω | 8 | - | - |
| OTTOCANALI 4K4 DSP+D | 4000 W | 450 W @ 2 Ω 500 W @ 4 Ω 250 W @ 8 Ω | 8 | - | Dante / AES67 |
| OTTOCANALI 4K4 | 4000 W | 450 W @ 2 Ω 500 W @ 4 Ω 250 W @ 8 Ω | 8 | - | - |
Características
- Universal switch mode power supply up to 400V AC tolerant with Power Factor Correction
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continuous variable speed fan, front to back airflow
- Fixed frequency switch mode output stage for high grade sound accuracy
- All models 2 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 14 kg / 30.8 lbs
- Standard Phoenix connectors: analog and digital input, audio outputs, aux supply, alarms and GPIO
- Remotely switchable double input
- Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
- Switchable 35Hz / 70Hz high pass filter per channel
- Mixed configuration with Lo-Z/Hi-Z systems possible
- Bridged mode, with low impedance, per channel pair
- TI C6000 DSP platform architecture
- AD/DA converter: dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channel
- Input/output independent equalizers per channel providing Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
- Crossovers: linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
- Input delay up to 2s and output delay up to 100ms for time alignment per channel
- Active DampingControl™ for cable compensation
- Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter
- NC/NO contacts per channel for alarm notifications
- Remote ON/OFF switch
- Remote AUX/MAIN inputs switch
- PWS OUT connector providing 24VDC
- Control and monitoring through ArmoníaPlus
Especificaciones
| Output power per channel | |||
|---|---|---|---|
| Output power per channel | 450 W @ 2 Ω | 500 W @ 4 Ω | 250 W @ 8 Ω |
| Bridge mode | 900 W @ 4 Ω | 1000 W @ 8 Ω | |
| Max output voltage / current | |||
| Max unclipped voltage @8 Ω | 65 Vpeak | ||
| Current | 15 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V - 264 V | ||
| Power consumption/current draw | |||
| Idle | 115 V: 74 W - 0.85 A | 230 V: 77 W - 0.75 A | |
| 1/8 of max output power @ 4 Ω | 115 V: 740 W - 6.6 A | 230 V: 750 W - 3.9 A | |
| THERMAL | |||
| Operating temperature range | 0° - 35° C - 32° - 95° F | ||
| Thermal dissipation* | |||
| Idle | 115 V: 253 BTU/h - 64 kcal/h | 230 V: 263 BTU/h - 66 kcal/h | |
| 1/8 of max output power @ 4 Ω | 115 V: 801 BTU/h - 202 kcal/h | 230 V: 839 BTU/h - 211 kcal/h | |
| 1/4 of max output power @ 4 Ω | 115 V: 1340 BTU/h - 338 kcal/h | 230 V: 1340 BTU/h - 338 kcal/h | |
