Ambos pares de canales de salida son puenteable, por lo que se puede manejar sistemas de 3 vías, así como de 2 vías en cargas biamplificado o simétricas con mayor potencia incluso a mayor impedancia. Compacto y flexibilidad son las palabras clave, incluso cuando miramos a la solución de DSP para el D-Cell504: de hecho, la etapa de salida también está disponible con dos entradas y cuatro salidas con DSP a bordo, una poderosa herramienta para dar forma a la señal de audio y aplicar el proceso dinámico necesario para sacar el máximo provecho de sus altavoces manteniéndolos seguros. Los servicios de MyPowersoft están disponibles para este producto. Pequeño, compacto y liviano: 100x78x45mm, 263g de peso en el amplificador / 300g en la fuente de alimentación. Características de protección completas e inteligentes: térmica, sobre corriente, alta frecuencia y no señal de audio presente. Limitador de Clipeo y señal constante. Voltaje de salida auxiliar (±12V regulado, 200mA máx. ) Punto de inserción para filtros pasivos o activos externos. Comando de Mute. Ventilador controlado por temperatura. Control Remoto y acceso a redes con la tarjeta de DSP opcional. Completamente integrado
Características
- Small Footprint / Low Weight: 100x78x45mm, 263g Amplifier Unit / 300g Power Supply Unit
- Comprehensive/smart protection features: thermal, overcurrent, high frequencies, and non-audio signals
- Clip and Permanent signal limiter
- Auxiliary output voltage (±12V regulated, 200mA max)
- Bypass line outputs for external active/passive filters
- Mute command
- Temperature-controlled Fan output
- Remote Control & Networking with optional DSP board
- Fully integrate into ArmoníaPlus, for complete monitoring and fine-tuning of the whole system
- Power Factor Correction (PFC): for worldwide operation and error-proof connection to mains voltage
- Modularity: separate power supply and amplification stages for easy and flexible integration
- Multistage architecture: possibility of feeding two amplification stages with a single power supply unit for multi-channel applications
- State-of-the-art fixed frequency PPM-PWM modulation: Unmatched audio performance from any perspective, intrinsic immunity to intermodulation artifacts in multi-channel applications
- Customizable Power Output: 350W + 350W @ 4Ω, 180W @ 8Ω + 350W @ 4Ω
- Compact size and EMI/safety certification: for quick and easy product development
- Very High efficiency/Low consumption
- High-quality audio: fixed-frequency modulation design for predictable high-end performance
- Auxiliary DSP processed outputs: for slaving other not DSP equipped units
- Load Monitoring: for transducer health diagnostic and safety regulation compliance
- Optional On-Board DSP 2 In - 4 Out 24 bit AD/DA conversion, 28×28 bit multiplier with 56-bit accumulator, full double-precision processing. Sigma Studio® based full set of filtering, equalization, dynamics processing - 4 presets storable.
Especificaciones
| Output power | |||
|---|---|---|---|
| Single-Ended Mode (SE) | 350 W @ 4 Ω | 190 W @ 8 Ω | 95 W @ 16 Ω |
| Bridge Mode (BTL) | 700 W @ 8 Ω | 380 W @ 16 Ω | |
| Max output voltage / current | |||
| Single Ended Mode (SE) | 55 Vpeak / 35 Apeak | ||
| Bridge Mode (BTL) | 110 Vpeak / 35 Apeak | ||
| AC main power | |||
| Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
| Rated Power Supply Voltage | 100-240 V ±10%, 50-60 Hz | ||
| Operating voltage | 90 V - 264 V | ||
| Power consumption | |||
| 1/8 of max output power @ 4 Ω | 115 V: 122 W - 1.08 A | 230 V: 121 W - 0.6 A | |
| I/4 of max output power @ 4 Ω | 115 V: 229 W - 2.04 A | 230 V: 225 W - 1.04 A | |
| THERMAL | |||
| Operating temperature range | 0° - 45° C - 32° - 113° F | ||
| Thermal dissipation | |||
| 1/8 of max output power @ 4 Ω | 115 V: 119.2 BTU/h - 30.0 kcal/h | 230 V: 119.2 BTU/h - 30.0 kcal/h | |
| 1/4 of max output power @ 4 Ω | 115 V: 184.4 BTU/h - 46.5 kcal/h | 230 V: 184.4 BTU/h - 46.5 kcal/h | |
