在需要高效紧凑音质优秀,且能长时间稳定工作功放的中小型音响系统中,和M系列所有的型号一样,M20D体现了出色的价值。由于小型系统中通常不需要2Ω的负载,M20D采用了最适合的4Ω负载。
Powersoft功放被全球领先的巡演和活动音响公司广泛采用,是一流的系统设计师、音响工程师以及工程商的首选。以尽可能小的尺寸提供可靠的、最高级别的功率和动态余量。
在需要多个扬声器的系统中,M20D能够直接驱动70V恒定电压的线路。
最大的效率保证了最低的电流消耗,散热以及功耗,这样一个“绿色”产品在长时间内能为用户节省大量经费。
M20D HDSP+ETH版本提供内置DSP和以太网接口。
高性能的DSP隐藏在功放内部,可以防止受到意外或故意损伤;监控和功放设置可通过ArmoníaPlus软件完成(可连接至MediaMatrix, Crestron, AMXcontrol, Q-SYS和监控系统)。
General | |||
Output power per channel | |||
Output power per channel | 1200 W @ 4 Ω | 600 W @ 8 Ω | |
Bridge mode | 2400 W @ 8 Ω | ||
Max output voltage / current | |||
Single channel mode | 116 Vpeak / 65 Apeak | ||
Bridge mode | 232 Vpeak | ||
AC main power | |||
Power supply | Universal, regulated switch mode with PFC (Power Factor Correction) | ||
Nominal power requirement | 100-240 V ±10%, 50-60 Hz | ||
Operating voltage | 90 V – 264 V | ||
Power consumption / current draw | |||
Idle | 115 V: 35 W – 0.6 A | 230 V: 35 W – 0.3 A | |
1/8 of max output power @ 4 Ω | 115 V: 371 W – 5 A | 230 V: 371 W – 2.54 A | |
1/4 of max output power @ 4 Ω | 115 V: 701 W – 9 A | 230 V: 701 W – 4.5 A | |
THERMAL | |||
Operating temperature range | 0° – 45° C – 32° – 113° F | ||
Thermal dissipation* | |||
Idle | 115 V: 126 BTU/h – 31.8 kcal/h | 230 V: 126 BTU/h – 31.8 kcal/h | |
1/8 of max output power @ 4 Ω | 115 V: 529 BTU/h – 133.3 kcal/h | 230 V: 529 BTU/h – 133.3 kcal/h | |
1/4 of max output power @ 4 Ω | 115 V: 935 BTU/h – 235.6 kcal/h | 230 V: 935 BTU/h – 235.6 kcal/h |