Discontinued Products – DigiMod 1000

2-channel Power Amplifier Module

DSP optional
PFC
SRM
Fixed Switch
Autoselection

OVERVIEW

We could say that the DigiMod 1000 is the footprint of the DigiMod Series: a powerful, compact, and lightweight 2-channel bridgeable amplifier with optional DSP integration, which premium audio quality and reliability are proven after several years “on the road” inside the powered products of top-level loudspeaker brands. Able to deliver 2x500W on 4Ω and 1x1000W on 8Ω in bridged mode, the DigiMod 1000 can be the perfect solution for a great variety of applications: small to mid subwoofers, stage/studio monitors, 2-way cabinets, and array elements as well as high power bass/guitar amplifiers. The versatility of the DigiMod can do even better: in fact, its power supply can drive the additional 2-channel output stage DigiMod 1000NPS, to become a multi-channel platform able to power 3-way loudspeakers or small PA systems “sub + satellites” where up to 1000W are needed for the low end. Even when used in combination with the DigiMod 1000NPS for up to 4-channel configuration, all the signals can be fully processed by only one of the optional DSP boards specifically designed by Powersoft for perfect interaction with DigiMod Series amplifier modules.

Features

  • Automatic mains voltage switch for worldwide operation
  • Thermal protection (power limiting – thermal shutdown)
  • Short-circuit/overload output protection
  • Clip limiter
  • Permanent signal limiter
  • High-frequency protection
  • Auxiliary output voltage (±12V regulated, 200mA max)
  • Bypass line outputs for external active/passive filters
  • Mute command
  • Temperature-controlled internal Fan and output
  • Optional DSP board
  • Remote Control & Networking with optional DSP board
  • Fully integrate with ArmoníaPlus, for complete monitoring and control of the whole system.

Specifications

General
Output power in single channel mode
Single channel mode500 W @ 2 Ω260 W @ 4 Ω130 W @ 8 Ω
Bridge mode1000 W @ 8 Ω520 W @ 16 Ω
Max output voltage / current
Single channel mode72 Vpeak / 28 Apeak
Bridge mode
AC main power
Power supplyUniversal, regulated switch mode
Nominal power requirement100-240 V ±10%, 50-60 Hz
Operating voltage90 V – 264 V
Power consuption
Idle
1/8 of max output power @ 4 Ω
1/4 of max output power @ 4 Ω
THERMAL
Operating temperature range0° – 45° C – 32° – 113° F
Thermal dissipation*
Idle
1/8 of max output power @ 4 Ω115 V: 150 BTU/h – 37.8 kcal/h230 V: 150 BTU/h – 37.8 kcal/h
1/4 of max output power @ 4 Ω115 V: 246 BTU/h – 62.8 kcal/h230 V: 246 BTU/h – 62.0 kcal/h